Written by Ad OpsOverview
Tutankhamon x Gorilla Glue is a sativa-leaning hybrid developed by Pyramid Seeds to marry the laser-focused potency of its Tutankhamon line with the resin-drenched ferocity of Gorilla Glue. With a genetic profile that draws on a legendary AK-47 phenotype and the sticky Sour Dubb–Chem’s Sister–Chocolate Diesel triad, this cross is bred for both power and production. It typically expresses high THC, a bold terpene mix of caryophyllene, myrcene, and limonene, and a vigorous growth pattern that rewards attentive training.
In practice, the cultivar tends to deliver an energetic, cerebral lift that gradually settles into a grounded body calm, reflecting its mostly sativa heritage with a glue-like density and frost. Experienced consumers often target it for daytime creativity or problem-solving sessions, while microdoses can support social focus and mood. Indoors, skilled growers regularly coax medium-high yields in the 500–650 g/m² range under optimized conditions, and outdoors the strain can push well above 700 g per plant when climate, soil biology, and canopy management align.
This guide distills what cultivators and connoisseurs can expect from seed to jar. It covers the origin story, genetic logic, and sensory signatures, then drills into measurable cannabinoids, dominant terpenes, and use-case profiles. A comprehensive cultivation section outlines environmental targets, nutrition, training, and harvest standards, while also addressing realistic yield expectations in light of industry discussions about advertised versus real-world results.
History
Pyramid Seeds, a Spanish breeder known for efficient, high-output lines, built Tutankhamon x Gorilla Glue to amplify potency and resin production without sacrificing manageable morphology. Tutankhamon itself is Pyramid’s celebrated AK-47 selection, refined for stability, high THC, and garden reliability. Gorilla Glue (often known as GG4) entered the scene as an accidental triumph renowned for trichome density and a pungent chem-diesel bouquet.
This cross emerged to deliver the sativa clarity and yield potential of Tutankhamon with the sticky, terpene-rich impact of Gorilla Glue. The project aligns with Pyramid’s catalog ethos: hardy plants that respond well to training and consistent feeding, with trim-friendly flowers for commercial and craft growers alike. Over successive selections, breeders prioritized resin coverage, calyx-to-leaf ratio, and a terpene stack that plays well in both flower and concentrates.
In the broader market, Tutankhamon x Gorilla Glue carved out a niche among growers who want the reward of high test results without temperamental plants. Early adopter reports emphasized a striking uniformity in stretch and cola formation, echoing the controlled vigor of Pyramid’s AK heritage. As a result, the strain often finds favor with indoor cultivators aiming for a repeatable canopy architecture across runs.
Genetic Lineage and Breeding Goals
Tutankhamon is a stabilized selection from the AK-47 family tree, a cultivar recognized since the late 1990s for sativa-forward effects and reliable yields. While AK-47 is technically a balanced hybrid, the Tutankhamon phenotype leans sativa in effect and structure, with a fast finish relative to other sativa-dominant lines. In parallel, Gorilla Glue arises from Sour Dubb x Chem’s Sister x Chocolate Diesel, a combination that explains its diesel-funk aroma and extraordinary trichome output.
By crossing Tutankhamon with Gorilla Glue, Pyramid Seeds targeted several measurable outcomes. First, they sought to cement THC in the low-to-mid 20s while keeping CBD low and minor cannabinoids like CBG and THCV detectable. Second, they aimed for a consistent calyx-forward bud set and a simplified trim that is friendly for commercial post-harvest teams.
The result typically exhibits sativa-leaning architecture with internode spacing that remains tighter than many pure sativas. Vigor is high, making it amenable to topping, low-stress training, and screen-of-green (ScrOG) techniques that can enhance canopy efficiency by 15–30% compared to untrained vertical grows. Resin saturation frequently approaches Gorilla Glue levels, which also benefits solventless extraction yields.
Appearance and Morphology
Tutankhamon x Gorilla Glue plants tend to grow with a pronounced central leader if left untopped, supported by symmetrical, productive laterals. Internodal spacing usually averages 4–7 cm under strong indoor lighting, which is tighter than many sativa-leaners and simplifies canopy management. Leaves begin with a medium-narrow leaflet and may broaden slightly in late veg, showing a rich green that lightens marginally with aggressive feeding.
In flower, the buds are conical to spear-shaped, with a high calyx-to-leaf ratio that makes for an efficient trim. Resin glands are abundant and bulbous, giving the flowers a white, frosted finish by week 6–7 of bloom. Pistils range from light apricot to copper, often curling tightly as the plant approaches peak ripeness.
Under cool nights, some phenotypes express faint lavender or deep green marbling, but the dominant palette is lime to forest green. Stigmas typically darken early relative to trichome maturity, so growers are better served by checking resin heads rather than relying on pistil color to time harvest. Overall, the plant’s structure is robust but not unwieldy, rewarding low to moderate defoliation and steady airflow.
Aroma
The aroma leans pungent and complex, uniting Tutankhamon’s herbal-spiced brightness with Gorilla Glue’s diesel-chem funk. On first grind, expect a volatile burst of solvent-like glue notes mixed with black pepper and citrus rind. As the bouquet opens, there are layers of pine resin, damp earth, and faint green apple peel from secondary terpenes.
In a closed jar, caryophyllene-driven spice often leads, backed by skunky diesel and a sweet-sour undertone reminiscent of fermented citrus. Pinene and humulene contribute a resinous forest character that lingers on the nose. Late-cure samples (4–8 weeks) tend to mellow the sharper chem edges into a more cohesive pine-citrus-spice halo.
Warmth intensifies the perceived fuel tone, while colder storage emphasizes herbal and woody facets. Users with sensitive smell frequently detect a faint chocolate or coffee bean nuance traceable to Gorilla Glue’s Chocolate Diesel ancestry. The nose is assertive enough for connoisseurs yet balanced, avoiding the ammonia spike some heavy-diesel cultivars display.
Flavor
The first puff typically delivers a bold diesel-pine strike, with peppery spice tickling the palate on the exhale. Limonene brightens the mid-palate with citrus zest, while myrcene smooths the finish into something rounder and slightly earthy. A resinous aftertaste lingers for several minutes, often described as glue-like or varnishy in a pleasant, terpene-forward way.
On glass or clean vaporizers at 175–190°C, subtler flavors stand out, such as green tea, cedar, and a hint of cacao. Combustion in joints tilts the profile toward pepper and diesel, while water pipes underscore pine and earth. Extended cures shift the balance from bright citrus to deeper wood and spice, enhancing pairing potential with coffee or dark chocolate.
The smoke is medium-dense and can feel expansive in the chest due to robust resin content. Users who prefer a smoother draw may favor vaporization, which preserves delicate terpenes and reduces throat bite. Across methods, flavor coherence remains high, a hallmark of both parent lines.
Cannabinoid Profile and Potency
Tutankhamon x Gorilla Glue presents high THC potential typical of its pedigree. Across reports, THC commonly falls in the 21–26% range when grown and cured to a high standard, with standout phenotypes capable of breaching 27% under ideal conditions. CBD is usually low, often between 0.05–0.8%, while CBG tends to appear around 0.3–1.0%.
Minor cannabinoids are modest but notable. THCV occasionally registers between 0.2–0.5%, which some users associate with a crisp, clear edge to the cerebral effect. CBC is often detected in the 0.1–0.3% window, potentially supporting entourage effects through subtle neuroprotective pathways.
For medical and adult-use consumers, the practical takeaway is pronounced potency with a narrow therapeutic window at higher doses. Newer users may find 5–10 mg THC equivalent sufficient for mood elevation and focus, while experienced consumers often operate comfortably at 10–25 mg per session. Vaporizer temperatures of 175–190°C can optimize cannabinoid-terpene synergy, whereas higher temps increase sedative depth at the expense of citrus brightness.
Terpene Profile and Chemistry
Caryophyllene typically leads the terpene pack, commonly measuring 0.4–1.0% of dry weight, lending pepper-spice complexity and potential CB2 receptor activity. Myrcene often follows at 0.3–0.9%, contributing earthy sweetness and a smoothing effect that rounds the diesel edge. Limonene is frequently present in the 0.2–0.7% range, infusing citrus lift and supporting mood-elevating aspects of the high.
Secondary terpenes include alpha-pinene and beta-pinene (0.1–0.4% combined), which reinforce pine resin notes and may subjectively aid alertness. Humulene, often 0.1–0.3%, deepens the woody, hop-like undertone and can temper sweetness, giving the profile its mature, connoisseur appeal. Trace linalool and ocimene are sometimes detected, adding faint floral-herbal cues.
From a functional standpoint, the caryophyllene–limonene–myrcene triad drives both flavor and feel. Caryophyllene’s interaction with CB2 may modulate inflammation, while limonene has been studied for anxiolytic and antidepressant-like effects in preclinical models. Myrcene, though often associated with sedation at high doses, acts here mainly as a flavor harmonizer in the presence of stimulating pinene and limonene.
Experiential Effects
The onset arrives quickly for smoked or vaporized flower, with a 1–3 minute ramp into a focused, uplifting headspace. Many users describe an immediate lift in motivation and a sharpened sensory field, consistent with the strain’s sativa-leaning lineage. Music and complex tasks can feel more immersive, but stimulation rarely tips into jittery if dosage is moderate.
After the first 20–30 minutes, a steady body calm creeps in, softening tension in the neck and shoulders without welding the user to the couch. Gorilla Glue’s grounding influence becomes more noticeable at higher doses or later in the session, adding weight and easing restlessness. The net effect is often described as “clear but anchored,” suitable for creative work, errands, or social conversation.
Duration typically spans 2–3 hours in smoked or vaped form, with a gradual taper that leaves users clearheaded rather than foggy. Overconsumption can lead to heavy eyelids and a lull in productivity, especially if combined with sedentary settings. Side effects at high doses may include dry mouth, dry eyes, and occasional anxiety in sensitive individuals; hydration and a calm environment help mitigate these.
Potential Medical Uses
Given its high THC and balanced terpene profile, Tutankhamon x Gorilla Glue may be explored by patients for mood elevation, focus, and daytime pain relief. Caryophyllene’s CB2 agonism, in concert with THC, could help modulate peripheral inflammation and discomfort, while limonene may lend anxiolytic support. Pinene and small amounts of THCV can provide a sense of mental clarity that some patients find helpful for task initiation.
Reports commonly mention use for stress, depressive mood, and tension-related headaches. The body ease arriving after the initial uplift can be beneficial for mild neuropathic pain or muscle tightness. For appetite stimulation, THC-rich cultivars like this one typically increase hunger within 45–90 minutes post-dose.
As always, individual responses vary, and medical outcomes depend on dose, setting, and personal physiology. Patients new to high-THC varieties should begin with low doses—2.5–5 mg THC equivalent—and titrate cautiously. Professional guidance from a clinician experienced in cannabinoid therapy is advisable for complex conditions or concurrent medication use.
Comprehensive Cultivation Guide
Tutankhamon x Gorilla Glue performs robustly across soil, soilless, and hydroponic systems, thriving in stable environments with strong light and consistent airflow. Aim for day temperatures of 24–26°C and nights at 20–21°C in veg, easing to 23–25°C day and 19–21°C night in flower. Relative humidity targets of 60–70% for seedlings, 50–55% in veg, 40–45% early flower, and 35–40% late flower help minimize powdery mildew while preserving terpene integrity.
Light intensity is a key yield lever. For veg, maintain 300–500 PPFD with a daily light integral (DLI) around 20–25 mol/m²/day; for flower, 700–900 PPFD with a DLI of 35–45 mol/m²/day is a proven zone. CO2 supplementation to 900–1200 ppm in flower can unlock an additional 10–20% biomass if nutrients and irrigation are balanced.
Nutrition should be front-loaded with nitrogen in veg and shifted toward phosphorus and potassium in bloom. In soilless systems, target an EC of 1.2–1.6 in veg and 1.7–2.1 in peak flower, with pH at 5.8–6.2; in living soil, keep irrigation solutions at pH 6.2–6.8 and allow the microbiome to buffer. Calcium and magnesium demands are moderate-high, particularly under LED lighting; 100–150 ppm Ca and 40–60 ppm Mg in solution often prevent interveinal chlorosis and weak stems.
Structurally, this plant responds exceptionally well to topping at the 5th–6th node and gentle low-stress training to widen the canopy. A single screen-of-green can fill a 60 x 60 cm space with 2–3 topped plants, often increasing light interception and bud uniformity. Defoliation should be incremental; remove large fan leaves that shade interior bud sites in late veg and again at week 3 of flower, avoiding extreme strip that can stall growth.
Watering cadence should allow moderate drybacks without severe wilting. In coco, smaller, more frequent feedings maintain stable root zone EC, while in soil a soak-and-dry rhythm encourages deeper rooting. Runoff EC tracking is invaluable; drifting runoff more than 0.4–0.6 EC above input indicates salt accumulation and the need for a mild flush.
Pest and disease management begins with airflow and cleanliness. Maintain 0.5–1.0 m/s air movement across the canopy, and prune lower fluff sites that trap humidity. Sticky traps and weekly scouting limit fungus gnat and thrip pressure, while sulfur or potassium bicarbonate can be used preventatively in veg for powdery mildew where permitted.
Flowering time typically lands around 8–10 weeks, depending on phenotype and environment. The majority of indoor runs finish near week 9, with a resin swell and terpene peak between days 56 and 65. Outdoors in warm, dry climates, harvest usually falls late September to mid-October; wet regions may require earlier cuts or rain protection.
Yield potential is strong when environmental fundamentals are met. Indoors, trained canopies commonly achieve 500–650 g/m² under efficient LEDs at 700–900 PPFD, while untrained vertical plants may sit closer to 400–500 g/m². Outdoors, healthy plants in 200–400 L containers or in-ground beds can exceed 700–1000 g per plant with full sun and balanced nutrition.
Note that, as outlets like CannaConnection routinely discuss in their cultivation coverage, advertised seed bank yields represent best-case, optimized conditions rather than average first-run results. Factors such as light quality, grower skill, and post-harvest handling can swing final grams by 20–40%. Use published figures as ceilings to benchmark progress rather than guarantees.
For media reuse, which CannaConnection has also highlighted in general guidance, proper remediation is essential. If reusing soil, remove old root zones, re-amend with balanced macro/micro nutrients, and re-inoculate with beneficial microbes and mycorrhizae; pasteu
